Crochet Hook Organizer

Crochet Hook Organizer

Designed to hold multiple crochet hooks in one compact, roll-up organizer that’s easy to store or take on the go.

Crochet Hook Organizer Instructions

Supply List:

 

Step 1: Prep Materials

1. Cut Pieces:

a. Outer Front Fabric: 11” x 14” - *note if using directional fabric, you may trim off the top portion (about 2”, rotate to reverse pattern and stitch back on, press seam to top.

b. Lining Fabric: 11”x8”

c. Pocket Piece: 11”x10.5”

2. Prep Lining Fabric: Press top edge down ½” to the wrong side.

Step 2: Stitching Step Outs

1. Stitch Pocket Fabric to bottom of Lining Fabric with right sides together along 11” side of material.

 

2. From the seam line, measure 1” into lining fabric and fold lining fabric to pocket fabric with right sides facing.

 

3. Measure 3.5” from fold and turn fabric towards bottom, wrong sides together. The Bottom of the pocket will be ½” longer than the bottom of the fold.
-top stitch pocket along top fold, optional 

 

4. Measure & mark divider stitching lines on the pocket material. Stitch dividing lines on the pocket material and lining material where they overlap only, stopping ½ from bottom of overlap. 

 

5. Stitch Outer Front Fabric to Pocket Fabric.

 

6. Optional: Add front embellishment to roll using Vario Tool, rivets and leather

 

7. Turn Roll with right sides facing towards each other on the inside - stitch side seam to the top edge from the bottom fold to the top edge of the lining fabric. I found this easiest to do while keeping the top portion of the front material laying flat.  Fold remainder of our fabric to the top edge of the lining, stitch along the side seam.

 

8. Trim Corners, press seams open and turn through the gap between the lining fabric and out fabric.

 

9. Top Stitch around outer edges with the top flap laying open. Close the top flap to the top of the divider pockets and top stitch the top edge of the roll, this will enclose the raw edge and hold the flap down a bit.

 

10. On the inside right - place eyelet above divider pockets and attach with Vario Creative Tool. 

 

11. Loop leather strips through eyelet, roll and tie!







Share This

Search